R&D Weighing

Weighing Controllers

Find your controller

Industrial weighing controllers convert load cell signals into automated batching, packing, filling and feeder logic, ready to connect to PLC, SCADA or HMI. Pick the application that fits your process.

Application
Mount
Scales

Every controller here talks Modbus RTU over RS-485 as standard. The GM9907 and GMC-P7 ranges add Ethernet Modbus TCP; the GMC-X3 can be ordered with PROFINET.

Showing 9 of 9 models

Choosing the right weighing controller for your application

GM9907-L2 bagging and packing weighing controller supplied by R&D Weighing, South Africa
GM9907-L2 packing controller

A weighing controller reads the load cell signal, runs the filling or batching sequence and switches the feed gates, valves, vibratory feeders and discharge on your machine. The right model depends on what you are weighing, how the product is fed and how the result reaches your PLC. R&D Weighing supplies controllers for bagging, liquid filling, recipe batching, bulk weighing and loss-in-weight feeding, all stocked and supported in Centurion.

Bagging, filling and batching controllers

The GM9907-L2 and GMC-P7 run bagging and packing scales in net mode with a weigh hopper or gross mode with the product weighed in the bag, and store 20 recipes. The GM9907-L4 handles loss-in-weight bagging, dispensing each bag out of a weighed hopper. The GM9907-L6 and L6D control liquid filling with filling lance control and leak detection. For recipes with several materials, the GM9907-LB batches up to 12 materials, and the GMC-P7-F8 guides an operator through manual batching with 10 formula groups of up to 20 materials each.

Single scale or dual scale?

Dual scale versions such as the GM9907-LD and GMC-P7 FD run two scales from one controller, so two weigh hoppers can work alternately and keep one bagging spout busy. The GM9907-L6D does the same for two liquid filling stations, and the GMC-X802 runs A and B scales on a vibratory feeder packing machine.

For OEMs and machine builders

Every controller here exposes weight, status and parameters over Modbus RTU on RS-485, and the GM9907 and GMC-P7 bagging models add Ethernet Modbus TCP. Your PLC stays in charge of the machine while the controller handles the weighing. The stainless steel DIN-rail GMC-X3 and GMC-X802 sit in the cabinet beside the PLC, and the X3 can be ordered with PROFINET. Ask about volume pricing and integration support through our partner programme.

Bulk weighing and loss-in-weight feeding

The GM9907-L5 runs a bulk scale that weighs material through a hopper in repeated cycles, totalising stock in and stock out and showing the flow rate in tonnes per hour. For continuous dosing, the GMC-X3 controls a loss-in-weight feeder: it weighs the supply hopper continuously and adjusts the feeder to hold a set feed rate.

Load cells and transmitters

A controller is only as good as the rest of the weighing chain. Pair it with load cells sized to the application capacity, or, where a PLC does the control and only needs a weight signal, use a weighing transmitter instead. We help you specify the full system at quote stage so the parts work together from day one.

Frequently asked questions

What is a weighing controller?
A weighing controller reads the load cell signal, runs the filling or batching sequence and switches the outputs that drive your feed gates, valves, vibratory feeders and discharge. It reports weight and status to your PLC or SCADA over Modbus RTU on RS-485, and on most models over Ethernet Modbus TCP as well.
What is the difference between packing, batching and bulk scale controllers?
Packing controllers fill one product to a target weight, bag after bag, on single or dual scale machines. Batching controllers weigh several materials in sequence to a stored recipe. Bulk scale controllers weigh material through a hopper in repeated cycles and keep running totals of stock in and stock out.
Which weighing controller suits operator-guided manual dosing?
The GMC-P7-F8. It prompts the operator for each material in turn, shows the target and tolerance on screen, and stores 10 formula groups of up to 20 materials each. It suits mixing rooms where ingredients are added by hand.
Can these controllers integrate with my PLC and SCADA system?
Yes. Every model has Modbus RTU on RS-485. The GM9907 range and the GMC-P7 bagging and batching models have Ethernet Modbus TCP built in, while the GMC-P7-F8, GMC-X3 and GMC-X802 take an Ethernet option. The GMC-X3 can also be ordered with PROFINET. Modbus is supported by most PLC and SCADA platforms, so integration is usually a matter of mapping registers.
How does a loss-in-weight controller differ from a normal batch controller?
A loss-in-weight controller such as the GMC-X3 weighs the supply hopper continuously and adjusts the feeder so material leaves at a set rate, giving steady continuous dosing. A batch controller fills to a target weight and then stops.
What is the difference between the GM9907 and the GMC-P7?
The GM9907 and the GMC-P7 bagging models share a 7-inch touch screen, 12 inputs, 16 outputs and the same bagging and batching functions. The GMC-P7 sits in a larger 233 x 168 mm housing, so the choice usually comes down to the panel cut-out on your machine. The GMC-P7-F8 adds operator-guided manual batching.

Need help choosing the right controller?

Tell us what you are weighing, how it is fed and what your PLC expects, and we will match the right model and configuration.

For your project

Talk to sales

Get a recommendation based on your product, line speed, accuracy and integration requirements.

Get a quote →
For OEMs & Resellers

Partner with us

OEM integration support, multi-unit pricing and authorised reseller programmes across SADC.